Thermal insulating asbestos boards

Products in fibre-reinforced cement — Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection

Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests

Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests — Amendment 1

Fire tests — Smoke-control door and shutter assemblies — Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy

Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers

Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers

Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers

Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers

Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms

Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms

Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms

Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for sprinkler system alarm valves, check valves, water motor alarms, retard devices and accelerators

Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves

Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves

Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves

Fire protection — Automatic sprinkler systems — Part 4: Requirements and test methods for quick-opening devices

Fire protection — Automatic sprinkler systems — Part 4: Requirements and test methods for quick opening devices

Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves

Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves

Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves

Fire protection — Automatic sprinkler systems — Part 6: Requirements and test methods for check valves

Fire protection — Automatic sprinkler systems — Part 6: Requirements and test methods for check valves

Fire protection — Automatic sprinkler systems — Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers

Fire protection — Automatic sprinkler systems — Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers

Fire protection — Automatic sprinkler systems — Part 8: Requirements and test methods for pre-action dry alarm valves

Fire protection — Automatic sprinkler systems — Part 8: Requirements and test methods for pre-action dry alarm valves

Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles

Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers

Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers

Fire protection — Automatic sprinkler systems — Part 11: Requirements and test methods for pipe hangers

Fire protection — Automatic sprinkler systems — Part 11: Requirements and test methods for pipe hangers

Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods for grooved-end components for steel pipe systems

Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods for grooved-end components for steel pipe systems

Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods for grooved-end components for steel pipe systems

Fire protection — Automatic sprinkler systems — Part 13: Requirements and test methods for extended-coverage sprinklers

Fire protection — Automatic nozzle systems — Part 14: Requirements and test methods for water spray nozzles

Fire protection — Automatic sprinkler systems — Part 16: Requirements and test methods for fire pump relief valves

Fire protection — Automatic sprinkler systems — Part 17: Requirements and test methods for pressure reducing valves

Fire detection and alarm systems — Part 1: General and definitions

Fire detection and alarm systems — Part 1: General and definitions

Fire detection and alarm systems — Part 1: General and definitions

Fire detection and alarm systems — Part 1: General and definitions

Fire detection and alarm systems — Part 2: Control and indicating equipment

Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment

Fire detection and alarm systems — Part 3: Audible alarm devices

Fire detection and alarm systems — Part 3: Audible alarm devices

Fire detection and alarm systems — Part 4: Power supply equipment

Fire detection and alarm systems — Part 4: Power supply equipment

Fire detection and alarm systems — Part 5: Point-type heat detectors

Fire detection and alarm systems — Part 5: Point-type heat detectors — Technical Corrigendum 1

Fire detection and alarm systems — Part 5: Point-type heat detectors

Fire detection and fire alarm systems — Part 5: Point type heat detectors

Fire detection and alarm systems — Part 6: Carbon monoxide fire detectors using electro-chemical cells

Fire detection and alarm systems — Part 6: Carbon monoxide fire detectors using electro-chemical cells

Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization

Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization

Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization

Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization

Fire detection and alarm systems — Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor

Fire detection and alarm systems — Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor

Fire detection and alarm systems — Part 9: Test fires for fire detectors

Fire detection and alarm systems — Part 9: Test fires for fire detectors

Fire detection and alarm systems — Part 9: Test fires for fire detectors

Fire detection and alarm systems — Part 10: Point-type flame detectors

Fire detection and alarm systems — Part 10: Point-type flame detectors

Fire detection and alarm systems — Part 11: Manual call points

Fire detection and alarm systems — Part 11: Manual call points — Amendment 1

Fire detection and alarm systems — Part 11: Manual call points

Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam

Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam

Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam

Fire detection and alarm systems — Part 13: Compatibility assessment of system components

Fire detection and alarm systems — Part 13: Compatibility assessment of system components

Fire detection and alarm systems — Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings

Fire detection and alarm systems — Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings

Fire detection and alarm systems — Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor

Fire detection and alarm systems — Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor — Technical Corrigendum 1

Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors

Fire detection and alarm systems — Part 16: Sound system control and indicating equipment

Fire detection and fire alarm systems — Part 17: Short-circuit isolators

Fire detection and fire alarm systems — Part 17: Transmission path isolators

Fire detection and alarm systems — Part 18: Input/output devices

Fire detection and alarm systems — Part 18: Input/output devices

Fire detection and alarm systems — Part 19: Design, installation, commissioning and service of sound systems for emergency purposes

Fire detection and alarm systems — Part 20: Aspirating smoke detectors

Fire detection and alarm systems — Part 21: Routing equipment

Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts

Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts

Fire detection and alarm systems — Part 23: Visual alarm devices

Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers

Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers — Amendment 1

Fire detection and fire alarm systems — Part 24: Fire alarm loudspeakers

Fire detection and fire alarm systems — Part 25: Components using radio transmission paths

Fire detection and alarm systems — Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor

Fire detection and alarm systems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors

Fire detection and alarm systems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors

Fire detection and alarm systems — Part 28: Fire protection control equipment

Fire detection and alarm systems — Part 28: Fire protection control equipment

Fire detection and alarm systems — Part 29: Video fire detectors

Fire detection and alarm systems — Part 29: Video fire detectors

Fire detection and alarm systems — Part 30: Design, installation, commissioning and service of video fire detector systems

Fire detection and alarm systems — Part 31: Resettable line-type heat detectors

Fire detection and alarm systems — Part 32: Non-resettable line-type heat detectors

Fire detection and fire alarm systems — Smoke alarms

Smoke alarms using scattered light, transmitted light or ionization

Smoke alarms using scattered light, transmitted light or ionization

Air cargo — Fire containment covers — Design, performance and testing requirements

Ships and marine technology - Lifesaving and fire protection — Atmospheric oil mist detectors for ships

Fire safety — Statistical data collection — Part 1: Overview of national fire statistics practices

Fire safety — Statistical data collection — Part 2: Vocabulary

Fire safety — Overview of national fire statistics practices

Ships and marine technology — Specifications for gas detectors intended for use on board ships — Part 1: Portable gas detectors for atmosphere testing of enclosed spaces

Ships and marine technology — Specifications for gas detectors intended for use on board ships — Part 1: Portable gas detectors for atmosphere testing of enclosed spaces

Smoke and heat control systems — Part 1: Specification for smoke barriers

Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators

Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators — Amendment 1

Smoke and heat control systems — Part 2: Specifications for natural smoke and heat exhaust ventilators

Smoke and heat control systems — Part 3: Specification for powered smoke and heat exhaust ventilators

Smoke and heat control systems — Part 3: Specification for powered smoke and heat exhaust ventilators — Amendment 1

Smoke and heat control systems — Part 3: Specifications for powered smoke and heat exhaust ventilators

Smoke and heat control systems — Part 4: Natural smoke and heat exhaust ventilators — Design, requirements and installation

Smoke and heat control systems — Part 5: Powered smoke exhaust systems — Requirements and design

Smoke and heat control systems — Part 7: Smoke ducts sections

Smoke and heat control systems — Part 8: Smoke control dampers

Smoke and heat control systems — Part 9: Specification for control equipment

Smoke and heat control systems — Part 10: Specification for power output devices

Explosive atmospheres — Part 49: Flame arresters — Performance requirements, test methods and limits for use