Filtrar :
Norma o proyecto bajo la responsabilidad directa de ISO/TC 131/SC 4 Secretaría | Etapa | ICS |
---|---|---|
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
|
95.99 | |
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
|
90.60 | |
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
|
95.99 | |
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
|
95.99 | |
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
|
60.60 | |
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
|
90.93 | |
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
|
90.93 | |
Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications
|
95.99 | |
Fluid power systems and components — Connectors and associated components — Outside diameters of tubes and inside diameters of hoses
|
95.99 | |
Fluid power systems and components — Connectors and associated components — Nominal outside diameters of tubes and nominal inside diameters of hoses
|
95.99 | |
Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes
|
90.93 | |
Fluid power systems and components — Connectors and associated components — Nominal pressures
|
95.99 | |
Fluid power systems and components — Connectors and associated components — Nominal pressures
|
95.99 | |
Fluid power systems and components — Connectors and associated components — Nominal pressures
|
90.20 | |
Connections for fluid power and general use — Ports and stud ends with ISO 261 threads and O-ring sealing — Part 1: Ports with O-ring seal in truncated housing
|
95.99 | |
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
|
95.99 | |
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
|
95.99 | |
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
|
60.60 | |
Connections for fluid power and general use — Ports and stud ends with ISO 261 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends — Dimensions, design, test methods and requirements
|
95.99 | |
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
|
90.93 | |
Connections for fluid power and general use — Ports and stud ends with ISO 261 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends — Dimensions, design, test methods and requirements
|
95.99 | |
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
|
90.93 | |
Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
|
95.99 | |
Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
|
90.93 | |
Fluid power systems and components — Metric ports — Dimensions and design
|
95.99 | |
Pneumatic fluid power — Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) — Plug connecting dimensions, specifications, application guidelines and testing
|
95.99 | |
Pneumatic fluid power — Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 MPa, and 2,5 MPa (10 bar, 16 bar and 25 bar) — Plug connecting dimensions, specifications, application guidelines and testing
|
90.60 | |
Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
|
95.99 | |
Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 — Technical Corrigendum 1
|
95.99 | |
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
|
90.92 | |
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
|
30.20 |
|
Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
|
95.99 | |
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
|
95.99 | |
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
|
90.93 | |
Hydraulic fluid power — Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) — Type I metric series and type II inch series
|
95.99 | |
Hydraulic fluid power — Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
|
95.99 | |
Hydraulic fluid power — Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
|
90.93 | |
Hydraulic fluid power — Hose assemblies — Method of test
|
95.99 | |
Hydraulic fluid power — Hoses and hose assemblies — Test methods
|
95.99 | |
Hydraulic fluid power — Test methods for hoses and hose assemblies
|
90.93 | |
Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements
|
95.99 | |
Hydraulic fluid power — Quick-action couplings — Part 2: Test methods
|
95.99 | |
Hydraulic fluid power — Quick-action couplings — Part 2: Test methods
|
95.99 | |
Hydraulic fluid power — Dimensions and requirements of quick-action couplings
|
95.99 | |
Hydraulic fluid power — Dimensions and requirements of quick-action couplings
|
60.60 | |
Metallic tube connections for fluid power and general use — Part 1: 24 degree compression fittings
|
95.99 | |
Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors
|
95.99 | |
Metallic tube connections for fluid power and general use — Part 1: 24° cone connectors
|
90.93 | |
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared fittings
|
95.99 | |
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
|
90.92 | |
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
|
30.60 |
|
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal fittings
|
95.99 | |
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
|
90.93 | |
Metallic tube connections for fluid power and general use — Part 4: 24 degree cone connectors with O-ring weld-on nipples
|
95.99 | |
Metallic tube connections for fluid power and general use — Part 5: Test methods for threaded hydraulic fluid power connections
|
95.99 | |
Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
|
90.93 | |
Hydraulic fluid power — Connection for tubes and hoses — Dimensions and designs for 37 degrees flare and 24 degrees flareless fittings
|
95.99 | |
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
|
90.93 | |
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
|
90.93 | |
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
|
90.93 | |
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
|
95.99 | |
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
|
90.93 | |
Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures
|
95.99 | |
Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures
|
95.99 | |
Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures
|
60.60 | |
Pneumatic fluid power — Polyurethane and polyamide tubings for use primarily in pneumatic installations — Dimensions and specification
|
60.60 | |
Polyurethane tubing for use primarily in pneumatic installations — Dimensions and specification
|
95.99 | |
Connectors for fluid power and general use — Designation and nomenclature
|
90.93 | |
Connectors for fluid power and general use — Assembly instructions for connectors with adjustable stud ends and O-ring sealing
|
95.99 | |
Connectors for fluid power and general use — Assembly instructions for connectors with adjustable stud ends and O-ring sealing
|
60.60 | |
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 1: Ports with O-ring seal in truncated housing
|
90.93 | |
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends
|
90.93 | |
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends
|
90.20 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
|
95.99 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
|
90.93 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends — Amendment 1
|
60.60 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
|
95.99 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
|
60.60 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162 flange ends
|
95.99 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
|
95.99 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
|
60.60 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 4: Hose fittings with ISO 6149 metric stud ends
|
90.93 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
|
90.93 | |
Connections for hydraulic fluid power and general use — Hose fittings — Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
|
90.93 | |
Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
|
90.60 | |
Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
|
90.60 | |
Pneumatic fluid power — Push-in connectors for thermoplastic tubes
|
95.99 | |
Pneumatic fluid power — Push-in connectors for thermoplastic tubes
|
60.60 | |
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 1: Coupling not for connection under pressure
|
90.93 | |
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Coupling with M16 x 2 end for connection under pressure
|
95.99 | |
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Coupling with M16 x 2 end for connection under pressure
|
90.93 | |
Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications
|
95.99 | |
Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications — Amendment 1
|
95.99 | |
Hydraulic fluid power — Dimensions and requirements of quick-action couplings, flush-face type
|
60.60 | |
Pneumatic fluid power — Connections — Ports and stud ends
|
95.99 | |
Pneumatic fluid power — Connections — Ports and stud ends — Amendment 1
|
95.99 | |
Pneumatic fluid power — Connections — Ports and stud ends
|
60.60 | |
Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements
|
90.20 | |
Hydraulic fluid power — Hose assemblies — Part 2: Recommended practices for hydraulic hose assemblies
|
95.99 | |
Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies
|
95.99 | |
Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies
|
90.60 | |
Hydraulic fluid power — Hose and hose assemblies — Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
|
90.20 | |
Hydraulic fluid power — Test methods for couplings actuated with or without tools
|
90.92 | |
Hydraulic fluid power — Test methods for couplings actuated with or without tools
|
20.60 |
|
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
|
95.99 | |
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections — Technical Corrigendum 1
|
95.99 | |
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
|
95.99 | |
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
|
60.60 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.