Filtrar :
Norma o proyecto | Etapa | TC |
---|---|---|
Rubber hoses and hose assemblies — Part 1: On-shore oil suction and discharge — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies — Part 2: Ship/dockside discharge — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses for oil suction and discharge
|
95.99 | ISO/TC 45/SC 1 |
Rubber hose and hose assemblies for oil suction and discharge service — Specification
|
90.93 | ISO/TC 45/SC 1 |
Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions
|
95.99 | ISO/TC 5 |
Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels — Metric series — Specification
|
95.99 | ISO/TC 138/SC 4 |
Rubber hose for liquefied petroleum gases (LPG)
|
95.99 | ISO/TC 45 |
Rubber hoses and hose assemblies for liquefied petroleum gases (LPG) — Bulk transfer applications — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) — Specification
|
60.60 | ISO/TC 45/SC 1 |
Rubber hose for fuel truck delivery
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses for bulk fuel truck delivery — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
|
60.60 | ISO/TC 45/SC 1 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
|
95.99 | ISO/TC 67 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B
|
95.99 | ISO/TC 67 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C
|
95.99 | ISO/TC 67 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C — Technical Corrigendum 1
|
95.99 | ISO/TC 67 |
Oil and natural gas industries — Steel line pipe
|
95.99 | ISO/TC 67 |
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
— Amendment 1
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
|
90.20 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service
|
60.60 | ISO/TC 67 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
|
30.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
|
30.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
|
30.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
|
95.99 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
|
60.60 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system
|
60.60 | ISO/TC 138/SC 4 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification
|
95.99 | ISO/TC 138/SC 4 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
|
95.99 | ISO/TC 138/SC 4 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
|
95.99 | ISO/TC 138/SC 4 |
Loading and unloading of liquefied natural gas (LNG) tank wagons and containers
|
60.60 | ISO/TC 67/SC 9 |
Rubber hoses — Measured fuel dispensing — Part 1: Conventional petroleum based fuels — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for measured fuel dispensing — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification
|
90.93 | ISO/TC 45/SC 1 |
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Terms and definitions
|
40.60 | ISO/TC 67/SC 2 |
Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material
|
95.99 | ISO/TC 45/SC 4 |
Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material
|
95.99 | ISO/TC 45/SC 4 |
Plastics hoses for suction and low-pressure discharge — Petroleum liquids — Specification
|
95.99 | ISO/TC 45/SC 1 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
|
95.99 | ISO/TC 45/SC 1 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
|
90.93 | ISO/TC 45/SC 1 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
|
90.93 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
|
90.93 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
|
90.93 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation
|
90.93 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specification
|
95.99 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specifications
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 2
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 2
|
95.99 | ISO/TC 138/SC 4 |
Road vehicles — Nozzle spouts for unleaded gasoline
|
90.93 | ISO/TC 22/SC 34 |
Road vehicles — Nozzle spouts for leaded gasoline and diesel fuel
|
90.93 | ISO/TC 22/SC 34 |
Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications
|
95.99 | ISO/TC 67/SC 4 |
Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing
|
90.93 | ISO/TC 58/SC 4 |
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
|
95.99 | ISO/TC 138/SC 4 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
|
95.99 | ISO/TC 138/SC 4 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm
|
95.99 | ISO/TC 138/SC 4 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
|
60.60 | ISO/TC 138/SC 4 |
Polyethylene (PE) valves for gas distribution systems
|
95.99 | ISO/TC 138/SC 7 |
Plastics piping systems for renovation of underground gas supply networks — Part 1: General
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 1: General
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
|
90.92 | ISO/TC 138/SC 8 |
Piping systems for rehabilitation of underground gas supply networks — Part 1: Polyethylene (PE) material
|
30.60 | ISO/TC 138/SC 8 |
Crude petroleum and petroleum products — Bulk cargo transfer — Guidelines for achieving the fullness of pipelines
|
90.20 | ISO/TC 28/SC 2 |
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification
|
90.93 | ISO/TC 45/SC 1 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
|
90.92 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1
|
60.60 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
|
40.20 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems
|
60.60 | ISO/TC 138/SC 4 |
Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems
|
60.60 | ISO/TC 67 |
Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
|
90.60 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Recommended practice for pipeline life extension
|
40.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems — Recommended practice for pipeline life extension
|
90.92 | ISO/TC 67/SC 2 |
Qualification of casing connections for thermal wells
|
95.99 | ISO/TC 67/SC 5 |
Qualification of casing connections for thermal wells
|
60.60 | ISO/TC 67/SC 5 |
Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles
|
90.93 | ISO/TC 220 |
Petroleum and natural gas industries — Pipeline transportation systems
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems
|
90.92 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems — Amendment 1: Complementary requirements for the transportation of fluids containing carbon dioxide or hydrogen
|
60.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Procedures for testing casing and tubing connections
|
95.99 | ISO/TC 67/SC 5 |
Petroleum and natural gas industries — Procedures for testing casing and tubing connections
|
90.20 | ISO/TC 67/SC 5 |
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines
|
90.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Collection and exchange of reliability and maintenance data for equipment
|
95.99 | ISO/TC 67 |
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment
|
95.99 | ISO/TC 67 |
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment
|
90.93 | ISO/TC 67 |
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
|
90.92 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves — Technical Corrigendum 1
|
60.60 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Pipeline valves
|
40.20 | ISO/TC 67/SC 2 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 4: System design and installation guidelines
|
90.93 | ISO/TC 138/SC 4 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
|
90.60 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
|
90.60 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
|
90.60 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
|
90.60 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
|
90.92 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Subsea pipeline valves
|
40.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines
|
95.99 | ISO/TC 67/SC 2 |
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
|
90.92 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines
|
40.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
|
95.99 | ISO/TC 67/SC 2 |
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
|
95.99 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
|
60.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
|
95.99 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Factory bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
|
60.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings
|
60.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges
|
60.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 4: Factory cold bends
|
90.20 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Piping
|
90.60 | ISO/TC 67/SC 6 |
Road vehicles — Blended fuels refuelling connector
|
90.93 | ISO/TC 22/SC 41 |
Road vehicles — Blended fuels refuelling connector — Amendment 1
|
60.60 | ISO/TC 22/SC 41 |
Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines
|
90.92 | ISO/TC 67/SC 2 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General — Amendment 1
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings — Amendment 1
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
|
60.00 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
|
95.99 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
|
90.92 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
|
40.60 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 7: Assessment of conformity
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 8: Training and assessment of fusion operators
|
60.60 | ISO/TC 138/SC 4 |
Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods
|
90.92 | ISO/TC 67/SC 2 |
Natural gas fuelling stations — CNG stations for fuelling vehicles
|
90.92 | ISO/TC 340 |
Natural gas fuelling stations — CNG stations for fuelling vehicles
|
40.00 | ISO/TC 340 |
Natural gas fuelling stations — LNG stations for fuelling vehicles
|
90.92 | ISO/TC 340 |
Natural gas fuelling stations — LNG stations for fuelling vehicles
|
40.00 | ISO/TC 340 |
Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks
|
95.99 | ISO/TC 67 |
Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks
|
60.60 | ISO/TC 67 |
Petroleum and natural gas industries — Guidelines for the marine interfaces of hybrid LNG terminals
|
90.93 | ISO/TC 67/SC 9 |
Metal ball valves for petroleum, petrochemical and allied industries
|
95.99 | ISO/TC 153 |
Metal ball valves for petroleum, petrochemical and allied industries
|
90.93 | ISO/TC 153 |
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amendment 1
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
|
90.60 | ISO/TC 138/SC 4 |
Guidelines for systems and installations for supply of LNG as fuel to ships
|
95.99 | ISO/TC 67/SC 9 |
Guidelines for safety and risk assessment of LNG fuel bunkering operations
|
90.20 | ISO/TC 67/SC 9 |
Petroleum, petrochemical and natural gas industries — Qualification testing and acceptance criteria for protective coating systems under insulation
|
90.93 | ISO/TC 67 |
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity management specification — Part 1: Full-life cycle integrity management for onshore pipeline
|
90.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity management specification — Part 2: Full-life cycle integrity management for offshore pipeline
|
90.60 | ISO/TC 67/SC 2 |
Determination of the resistance to cryogenic spillage of insulation materials — Part 1: Liquid phase
|
90.93 | ISO/TC 67/SC 9 |
Determination of the resistance to cryogenic spill of insulation materials — Part 2: Vapour exposure
|
60.60 | ISO/TC 67/SC 9 |
Determination of the resistance to cryogenic spillage of insulation materials — Part 3: Jet release
|
90.93 | ISO/TC 67/SC 9 |
Installation and equipment for liquefied natural gas — Design of floating LNG installations — Part 1: General requirements
|
60.60 | ISO/TC 67/SC 9 |
Installation and equipment for liquefied natural gas — Design of floating LNG installations — Part 2: Specific FSRU issues
|
60.60 | ISO/TC 67/SC 9 |
Oil and gas industries including lower carbon energy — Guidelines for green manufacturing and lower carbon emission of oil and gas-field equipment and materials
|
60.60 | ISO/TC 67 |
Petroleum, petrochemical and natural gas industries — Production assurance and reliability management
|
95.99 | ISO/TC 67 |
Petroleum, petrochemical and natural gas industries — Production assurance and reliability management
|
90.93 | ISO/TC 67 |
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems — Amendment 1
|
60.60 | ISO/TC 138/SC 4 |
Petroleum and natural gas industries — Pipeline transportation systems — Test procedures for mechanical connectors
|
90.93 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
|
90.92 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
|
90.92 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
|
40.00 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
|
90.92 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1: Introduction of mesh-backed coating systems
|
60.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)
|
90.92 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)
|
40.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
|
95.99 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
|
90.92 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
|
40.00 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 11: Coatings for in-field application, coating repairs and rehabilitation
|
90.60 | ISO/TC 67/SC 2 |
Petroleum, petrochemical and natural gas industries — Prevention of corrosion on pipeline systems influenced by stray currents
|
60.60 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Onshore and offshore pipelines pig traps design requirements
|
50.00 | ISO/TC 67/SC 2 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 6: Code of practice for design, handling and installation
|
95.99 | ISO/TC 138/SC 4 |
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity assessment specification
|
60.60 | ISO/TC 67/SC 2 |
Gas cylinders — Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) — Design and construction
|
90.93 | ISO/TC 58/SC 3 |
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 1: Clad bends
|
60.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 2: Clad fittings
|
60.60 | ISO/TC 67/SC 2 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification
|
95.99 | ISO/TC 45/SC 1 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification
|
60.60 | ISO/TC 45/SC 1 |
Petroleum and natural gas industries — Installation and equipment for liquefied natural gas — Ship-to-shore interface and port operations
|
90.93 | ISO/TC 67/SC 9 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.