Reference number
ISO/ASTM 51205:2017
International Standard
ISO/ASTM 51205:2017
Practice for use of a ceric-cerous sulfate dosimetry system
Edition 3
2017-05
Preview
ISO/ASTM 51205:2017
71479
Indisponible en français
Publiée (Edition 3, 2017)
Cette publication a été révisée et confirmée pour la dernière fois en 2022. Cette édition reste donc d’actualité.

ISO/ASTM 51205:2017

ISO/ASTM 51205:2017
71479
Langue
Format
CHF 63
Convertir les francs suisses (CHF) dans une autre devise

Résumé

1.1 This practice covers the preparation, testing, and procedure for using the ceric-cerous sulfate dosimetry system to measure absorbed dose to water when exposed to ionizing radiation. The system consists of a dosimeter and appropriate analytical instrumentation. For simplicity, the system will be referred to as the ceric-cerous system. The ceric-cerous dosimeter is classified as a type 1 dosimeter on the basis of the effect of influence quantities. The ceric-cerous system may be used as a reference standard dosimetry system or as a routine dosimetry system.

1.2 ISO/ASTM 51205:2017 is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ISO/ASTM Practice 52628 for the ceric-cerous system. It is intended to be read in conjunction with ISO/ASTM Practice 52628.

1.3 This practice describes both the spectrophotometric and the potentiometric readout procedures for the ceric-cerous system.

1.4 This practice applies only to gamma radiation, X-radiation/bremsstrahlung, and high energy electrons.

Informations générales

  •  : Publiée
     : 2017-05
    : Norme internationale confirmée [90.93]
  •  : 3
  • ISO/TC 85
    17.240 
  • RSS mises à jour

Vous avez une question?

Consulter notre Aide et assistance