Reference number
ISO 16840-10:2021
© ISO 2024
International Standard
ISO 16840-10:2021
Wheelchair seating — Part 10: Resistance to ignition of postural support devices — Requirements and test method
Edition 2
2021-06
Preview
Indisponible en français
Publiée (Edition 2, 2021)
Cette norme comprend 1 amendement.

ISO 16840-10:2021

Langue
Format
CHF 96
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document specifies requirements and test methods to assess the resistance to ignition by smouldering cigarette equivalent of integrated or non-integrated components of a wheelchair intended to protect tissue integrity and/or provide postural support. The electronic ignition source is also a simulation of other potential sources of environmental ignition hazards.

The tests measure only the resistance to ignition of the items tested, and not the ignitability of the complete wheelchair. It gives an indication, but cannot guarantee, the ignition behaviour of the assembled devices of a complete wheelchair.

This document does not apply to resistance to ignition of structural parts of a wheelchair. This document does not cover changes in resistance to ignition as a result of regular washing or use of the postural support devices.

This document does not apply to the control of risks created by electrical and electronic components.

This document allows for the separate testing of components of a wheelchair that are normally used in the horizontal plane (e.g. a seat cushion) from those normally used in the vertical plane (e.g. a back support).

This document describes testing an assembly of the composite of materials as used in the component. The results of the tests in this document do not give any indication of the resistance to ignition of any of the separate individual materials of the test sample.

NOTE      The intent of this document is primarily to address components that interface with the human body, such as cushions for positioning, or whose described purpose is that of protecting skin tissue against pressure, shear, and maceration related damage, as well as textile, foam, and plastic-based postural support devices.

Informations générales

  • État actuel
     : Publiée
    Date de publication
     : 2021-06
    Version corrigée (en)
     : 2022-01
    Stade
    : Norme internationale publiée [60.60]
  • Edition
     : 2
  • Comité technique :
    ISO/TC 173/SC 1
    ICS :
    11.180.10 
  • RSS mises à jour

 Amendements

Des amendements sont publiés lorsqu’il s’avère que de nouveaux éléments doivent être ajoutés à un document normatif existant. Ils peuvent également inclure des corrections d’ordre rédactionnel ou technique à appliquer au document en vigueur.

Amendement 1

Annexes et méthode d'essai supplémentaires

Edition 2024

Langue
Format
CHF 18
Convertir les francs suisses (CHF) dans une autre devise

Cycle de vie

Objectifs de développement durable

Cette norme contribue à l'Objectif de développement durable suivant

3
Bonne santé et bien-être

Vous avez une question?

Consulter notre Aide et assistance

  2. Store
  3. Catalogue de normes
  4. ICS
  5. 11
  6. 11.180
  7. 11.180.10
  8. ISO 16840-10:2021