Filter :
Standard and/or project | Stage | TC |
---|---|---|
Withdrawal of ISO/R 15/1-1968
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 15/2-1970
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions — General plan
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions — General plan — Addendum 1: Diameter series 7 (d greater than or equal to 12 mm and less than or equal to 30 mm)
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions, general plan
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions, general plan
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions, general plan
|
90.93 | ISO/TC 4 |
Rolling bearings — Static load ratings
|
95.99 | ISO/TC 4 |
Rolling bearings — Static load ratings
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Static load ratings — Amendment 1: Annex A (informative) — Discontinuities in the calculation of basic static load ratings
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Static load ratings
|
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Static load ratings — Amendment 1
|
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Thrust bearings with flat back faces — Boundary dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
|
95.99 | ISO/TC 4 |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
|
95.99 | ISO/TC 4 |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
|
90.93 | ISO/TC 4/SC 4 |
Rolling bearing accessories — Part 1: Tapered sleeves
|
95.99 | ISO/TC 4 |
Rolling bearing accessories — Part 2: Plummer block housings
|
95.99 | ISO/TC 4 |
Rolling bearings — Plummer block housings — Boundary dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Plummer block housings — Boundary dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Plummer block housings — Boundary dimensions
|
90.93 | ISO/TC 4/SC 4 |
Withdrawal of ISO/R 199-1961
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 199-1968
|
95.99 | ISO/TC 4 |
Rolling bearings — Thrust ball bearings — Tolerances
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Thrust bearings — Tolerances
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Thrust bearings — Tolerances
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Thrust bearings — Geometrical product specifications (GPS) and tolerance values
|
60.60 | ISO/TC 4/SC 4 |
Withdrawal of ISO/R 200-1961
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 201-1961
|
95.99 | ISO/TC 4 |
Cylindrical roller bearings — Separate thrust collars — Boundary dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions
|
90.93 | ISO/TC 4/SC 5 |
Rolling bearings — Dynamic load ratings and rating life — Part 1: Calculation methods
|
95.99 | ISO/TC 4 |
Rolling bearings — Dynamic load ratings and rating life
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life — Amendment 1
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life — Amendment 2: Life modification factor aXYZ
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life
|
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life — Amendment 1
|
30.99 | ISO/TC 4/SC 8 |
Withdrawal of ISO/R 300/I-1963
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 300/II-1965
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 300/III-1968
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/1-1963
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/2-1965
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/3-1967
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/4-1968
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/5-1969
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/6-1970
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/7-1970
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/8-1973
|
95.99 | ISO/TC 4 |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations
|
95.99 | ISO/TC 4 |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations — Addendum 1
|
95.99 | ISO/TC 4 |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations — Addendum 2
|
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations
|
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations — Amendment 1
|
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations
|
90.60 | ISO/TC 4/SC 5 |
Rolling bearings with locating snap ring — Dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings with locating snap ring — Dimensions and tolerances
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values
|
90.93 | ISO/TC 4/SC 4 |
Withdrawal of ISO/R 465-1965
|
95.99 | ISO/TC 4 |
Radial bearings — Tolerances
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Tolerances
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings — Tolerances
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings — Tolerances
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
|
60.60 | ISO/TC 4/SC 4 |
Withdrawal of ISO/R 533-1966
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 577/1-1967
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 477/2-1968
|
95.99 | ISO/TC 4 |
Withdrawal of ISO 477/3-1973
|
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Inch series — Tolerance classes 4 (normal tolerances), 3, 0 and 00
|
95.99 | ISO/TC 4 |
Tapered roller bearings — Inch series — Tolerances
|
95.99 | ISO/TC 4 |
Rolling bearings — Metric series — Chamfer dimension limits
|
95.99 | ISO/TC 4 |
Rolling bearings — Chamfer dimensions — Maximum values
|
90.92 | ISO/TC 4/SC 4 |
Rolling bearings — Chamfer dimensions — Maximum values — Amendment 1
|
60.60 | ISO/TC 4/SC 4 |
Rolling bearings — Chamfer dimensions — Geometrical product specifications (GPS)
|
40.00 | ISO/TC 4/SC 4 |
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
|
95.99 | ISO/TC 17/SC 4 |
Heat-treatable steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
|
60.60 | ISO/TC 17/SC 4 |
Withdrawal of ISO/R 1038-1969
|
95.99 | ISO/TC 4 |
Tapered roller bearings — Inch series — Chamfer dimension limits
|
95.99 | ISO/TC 4 |
Rolling bearings — Tolerances — Part 1: Terms and definitions
|
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Tolerances — Part 2: Measuring and gauging principles and methods
|
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Tolerances — Definitions
|
95.99 | ISO/TC 4 |
Rolling bearings for railway axle-boxes — Acceptance inspection
|
95.99 | ISO/TC 4 |
Needle roller bearings — Light and medium series — Dimensions and tolerances
|
95.99 | ISO/TC 4 |
Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances — Amendment 1: Tolerances for shaft raceway
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
|
60.60 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values — Amendment 1
|
60.60 | ISO/TC 4/SC 5 |
Rolling bearings — Instrument precision bearings — Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Instrument precision bearings — Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Instrument precision bearings
|
95.99 | ISO/TC 4 |
Rolling bearings — Instrument precision bearings
|
95.99 | ISO/TC 4 |
Rolling bearings — Explanatory notes on ISO 281 — Part 1: Basic dynamic load rating and basic rating life
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Explanatory notes on ISO 281 — Part 1: Basic dynamic load rating and basic rating life — Technical Corrigendum 1
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Explanatory notes on ISO 281 — Part 1: Basic dynamic load rating and basic rating life
|
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Explanatory notes on ISO 281 — Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses
|
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Explanatory notes on ISO 281 — Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses — Technical Corrigendum 1
|
60.60 | ISO/TC 4/SC 8 |
Withdrawal of ISO/R 1646-1970
|
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 1648-1971
|
95.99 | ISO/TC 4 |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width
|
95.99 | ISO/TC 4 |
Withdrawal of ISO 2265-1972
|
95.99 | ISO/TC 4 |
Withdrawal of ISO 2316-1973
|
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class)
|
95.99 | ISO/TC 4 |
Rolling bearings — Accessories — Part 1: Tapered sleeves — Dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Accessories — Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves
|
90.93 | ISO/TC 4/SC 6 |
Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Accessories — Part 2: Dimensions for locknuts and locking devices
|
90.93 | ISO/TC 4/SC 6 |
Rolling bearings — Locknuts, narrow series, and lockwashers with straight inner tab
|
95.99 | ISO/TC 4 |
Rolling bearings — Locknuts, wide series, and lockwashers with bent inner tab
|
95.99 | ISO/TC 4 |
Needle roller bearings — Needle roller and cage assemblies — Metric series — Part 1: Radial needle roller and cage assemblies — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Radial needle roller and cage assemblies — Dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
|
60.60 | ISO/TC 4/SC 5 |
Needle roller bearings — Thrust needle roller and cage assemblies, thrust washers — Dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
|
60.60 | ISO/TC 4/SC 5 |
Needle roller bearings — Needle rollers — Dimensions — Metric series
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle rollers — Dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle rollers — Dimensions and tolerances — Technical Corrigendum 1
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
|
90.93 | ISO/TC 4/SC 5 |
Withdrawal of ISO 3097-1974
|
95.99 | ISO/TC 4 |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars
|
95.99 | ISO/TC 4 |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Cast and pressed housings
|
95.99 | ISO/TC 4 |
Rolling bearings — Cast and pressed housings for insert bearings
|
95.99 | ISO/TC 4/SC 6 |
Rolling bearings — Cast and pressed housings for insert bearings — Boundary dimensions and tolerances
|
90.60 | ISO/TC 4/SC 6 |
Rolling bearings — Needle roller bearings, drawn cup, without inner ring — Metric series — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings, drawn cup without inner rings — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings, drawn cup without inner ring — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
|
60.60 | ISO/TC 4/SC 5 |
Rolling bearings — Balls — Part 1: Steel balls
|
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Balls — Part 1: Steel balls — Technical Corrigendum 1
|
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Balls — Part 1: Steel balls
|
90.93 | ISO/TC 4/SC 12 |
Rolling bearings — Balls — Part 2: Ceramic balls
|
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Balls — Part 2: Ceramic balls
|
90.93 | ISO/TC 4/SC 12 |
Rolling bearings — Bearing parts — Balls for rolling bearings
|
95.99 | ISO/TC 4 |
Rolling bearings — Balls — Dimensions and tolerances
|
95.99 | ISO/TC 4 |
Rolling bearings — Balls — Dimensions and tolerances
|
95.99 | ISO/TC 4 |
Rolling bearings — Ceramic rolling elements — Terms and characteristics of surface imperfections
|
60.60 | ISO/TC 4 |
Rolling bearings — Vocabulary
|
95.99 | ISO/TC 4 |
Rolling bearings — Vocabulary
|
95.99 | ISO/TC 4 |
Rolling bearings — Vocabulary — Amendment 1
|
95.99 | ISO/TC 4 |
Rolling bearings — Vocabulary
|
95.99 | ISO/TC 4 |
Rolling bearings — Vocabulary
|
60.60 | ISO/TC 4 |
Rolling bearings — Internal clearance — Part 1: Radial internal clearance for radial bearings
|
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Internal clearance — Part 2: Axial internal clearance for four-point-contact ball bearings
|
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Radial internal clearance
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial internal clearance
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Needle rollers — Tolerances
|
95.99 | ISO/TC 4 |
Needle roller bearings — Track rollers — Boundary dimensions
|
95.99 | ISO/TC 4/SC 5 |
Needle roller bearings — Heavy series — Dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Needle roller bearings — Track rollers — Tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearing track rollers — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearing track rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
|
90.93 | ISO/TC 4/SC 5 |
Rolling bearings — Test and assessment methods for cleanliness
|
60.60 | ISO/TC 4 |
Radial ball bearings with flanged outer ring — Flange dimensions
|
95.99 | ISO/TC 4 |
Radial ball bearings with flanged outer ring — Flange dimensions — Technical Corrigendum 1
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions
|
95.99 | ISO/TC 4 |
Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions
|
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions
|
60.60 | ISO/TC 4/SC 12 |
Explanatory notes on ISO 281/1-1977
|
95.99 | ISO/TC 4/SC 8 |
Technical drawings — Rolling bearings — Part 1: General simplified representation
|
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Rolling bearings — Part 2: Detailed simplified representation
|
90.93 | ISO/TC 10/SC 6 |
Rolling bearings — Measuring and gauging principles and methods
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Insert bearings and eccentric locking collars
|
95.99 | ISO/TC 4/SC 6 |
Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances
|
95.99 | ISO/TC 4/SC 6 |
Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances — Amendment 1: Diameter series 3
|
95.99 | ISO/TC 4/SC 6 |
Rolling bearings — Insert bearings and eccentric locking collars — Geometrical product specifications (GPS) and tolerance values
|
90.60 | ISO/TC 4/SC 6 |
Rolling bearings, linear motion, recirculating ball, sleeve type — Metric series
|
95.99 | ISO/TC 4/SC 11 |
Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances
|
90.93 | ISO/TC 4/SC 11 |
Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances — Amendment 1
|
60.60 | ISO/TC 4/SC 11 |
Rolling bearings — Metric tapered roller bearings — Designation system
|
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Designation system
|
90.93 | ISO/TC 4/SC 5 |
Rolling bearings — Tapered roller bearings — Designation system — Amendment 1: Design variant designation and comparison of tolerance class designations for single-row tapered roller bearings
|
60.60 | ISO/TC 4/SC 5 |
Explanatory notes on ISO 76
|
95.99 | ISO/TC 4/SC 8 |
Explanatory notes on ISO 76
|
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides
|
95.99 | ISO/TC 4 |
Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides
|
90.93 | ISO/TC 4/SC 5 |
Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer ring non-thrust side
|
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer ring non-thrust side
|
90.60 | ISO/TC 4/SC 12 |
Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 1: Boundary dimensions and tolerances for series 1, 2 and 3
|
90.93 | ISO/TC 4/SC 11 |
Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 2: Boundary dimensions and tolerances for series 4 and 5
|
90.93 | ISO/TC 4/SC 11 |
Rolling bearings — Cylindrical rollers — Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for steel rollers
|
60.60 | ISO/TC 4/SC 5 |
Rolling bearings — Cylindrical rollers — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
|
90.93 | ISO/TC 4/SC 5 |
Rolling bearings — Steel cylindrical rollers — Dimensions and tolerances
|
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Accessories for sleeve type linear ball bearings — Part 1: Boundary dimensions and tolerances for series 1 and 3
|
95.99 | ISO/TC 4/SC 11 |
Rolling bearings — Accessories for sleeve type linear ball bearings — Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3
|
90.93 | ISO/TC 4/SC 11 |
Rolling bearings — Accessories for sleeve type linear ball bearings — Part 2: Boundary dimensions and tolerances for series 5
|
95.99 | ISO/TC 4/SC 11 |
Rolling bearings — Accessories for sleeve type linear ball bearings — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5
|
90.93 | ISO/TC 4/SC 11 |
Rolling bearings, linear motion, recirculating ball, sleeve type — Accessories
|
95.99 | ISO/TC 4/SC 11 |
Rolling bearings, linear motion, recirculating ball, sleeve type — Accessories — Technical Corrigendum 1
|
95.99 | ISO/TC 4/SC 11 |
Rolling bearings — Linear motion rolling bearings — Part 1: Dynamic load ratings and rating life
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Linear motion rolling bearings — Part 1: Dynamic load ratings and rating life
|
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Linear motion rolling bearings — Part 2: Static load ratings
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Linear motion rolling bearings — Part 2: Static load ratings
|
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Symbols for quantities
|
95.99 | ISO/TC 4 |
Rolling bearings — Symbols for physical quantities
|
90.60 | ISO/TC 4/SC 4 |
Rolling bearings — Symbols for physical quantities — Amendment 1
|
60.60 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals
|
90.93 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface — Technical Corrigendum 1
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface
|
90.93 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
|
95.99 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface — Technical Corrigendum 1
|
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
|
90.93 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
|
95.99 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
|
90.93 | ISO/TC 4 |
Rolling bearings — Damage and failures — Terms, characteristics and causes
|
95.99 | ISO/TC 4 |
Rolling bearings — Damage and failures — Terms, characteristics and causes
|
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Thermal speed rating — Calculation and coefficients
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Thermal speed rating — Calculation
|
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Methods for calculating the modified reference rating life for universally loaded rolling bearings
|
50.20 | ISO/TC 4/SC 8 |
Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings
|
90.92 | ISO/TC 4/SC 8 |
Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings — Technical Corrigendum 1
|
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life — Discontinuities in the calculating of basic dynamic load ratings
|
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Method for calculating the effective static safety factor for universally loaded rolling bearings
|
60.00 | ISO/TC 4/SC 8 |
Rolling bearings — Ceramic bearing balls — Determination of strength by notched ball test
|
90.93 | ISO/TC 4/SC 12 |
Spherical plain bearings — Method for the calculation of static and dynamic load ratings
|
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Load ratings for hybrid bearings with rolling elements made of ceramic — Part 1: Dynamic load ratings
|
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Load ratings for hybrid bearings with rolling elements made of ceramic — Part 2: Static load ratings
|
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Radial bearings, retaining slots — Dimensions and tolerances
|
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Radial bearings, retaining slots — Dimensions and tolerances
|
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Radial bearings, retaining slots — Dimensions, geometrical product specifications (GPS) and tolerance values
|
60.60 | ISO/TC 4/SC 12 |
Rolling bearings — Aligning thrust ball bearings and aligning seat washers — Boundary dimensions
|
90.93 | ISO/TC 4/SC 12 |
Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
|
60.60 | ISO/TC 4 |
Rolling bearings — Noise testing of rolling bearing greases — Part 2: Test and evaluation method BQ+
|
60.60 | ISO/TC 4 |
Rolling bearings — Noise testing of rolling bearing greases — Part 3: Test and evaluation method MQ
|
60.60 | ISO/TC 4 |
Rolling bearings — Noise testing of rolling bearing greases — Part 4: Test and evaluation method NQ
|
60.60 | ISO/TC 4 |
Rolling bearings — Geometrical product specifications (GPS) — Vocabulary and representation of symbols
|
60.60 | ISO/TC 4/SC 4 |
Rolling bearings — Parts library — Part 1: Reference dictionary for rolling bearings
|
95.99 | ISO/TC 4 |
Rolling bearings — Parts library — Reference dictionary for rolling bearings and spherical plain bearings
|
30.99 | ISO/TC 4 |
Rolling bearings — Parts library — Reference dictionary for rolling bearings
|
90.92 | ISO/TC 4 |
Rolling bearings — Linear motion rolling bearings — Vocabulary
|
90.93 | ISO/TC 4/SC 11 |
No matching records found. Please try changing the filter settings.