Подкомитет Заголовок подкомитета Опубликованные стандарты Стандарты, находящиеся на стадии разработки
ISO/TC 39/SC 2 Test conditions for metal cutting machine tools 70 3
ISO/TC 39/SC 4 Woodworking machines 19 7
ISO/TC 39/SC 6 Noise of machine tools 3 0
ISO/TC 39/SC 8 Work holding spindles and chucks 11 0
ISO/TC 39/SC 10 Safety 11 3
Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 39 Секретариата Этап ICS
Machine tools — Lathe tool posts — Overall internal height
95.99
Machine tools — Speeds and feeds
90.93
Machine tool test code
95.99
Machine tools — Self-holding tapers for tool shanks
95.99
7/24 tapers for tool shanks for manual changing
95.99
Machine tools — Lathe centres — Sizes for interchangeability
90.93
Machine tool tables — T-slots and corresponding bolts
95.99
Machine tool tables — T-slots and corresponding bolts
90.93
Machine tools — Symbols for indications appearing on machine tools
90.93
Symbols for indications appearing on machine tools
95.99
Machine tools — Direction of operation of controls
95.99
Machine tools — Direction of operation of controls
90.93
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 1: Type A
95.99
Withdrawal of ISO/R 867-1968
95.99
Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy — Addendum 1: Annex — Universal milling machines with a swivelling table
95.99
Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy — Amendment 1
95.99
Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy
95.99
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy
95.99
Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy
95.99
Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy — Addendum 1
95.99
Test conditions for external cylindrical grinding machines with a movable table — Testing of accuracy
95.99
Modular units for machine tool construction — Slide units
90.93
Modular units for machine tool construction — Slide units — Amendment 1
60.60
Modular units for machine tool construction — Headstocks
90.93
Modular units for machine tool construction — Wing bases for slide units
90.93
Modular units for machine tool construction — Centre bases and columns
90.93
Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads
95.99
Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads
90.93
Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions
90.93
Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions — Amendment 1
60.60
Modular units for machine tool construction — Wing base for columns
90.93
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table type machines
95.99
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table type machines — Addendum 1
95.99
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 2: Floor type machines
95.99
Modular units for machine tool construction — Rotary tables and multi-sided centre bases for rotary tables
90.93
Ball screws — Part 1: Vocabulary and designation
95.99
Ball screws — Part 1: Vocabulary and designation
90.93
Ball screws — Part 2: Nominal diameters and nominal leads — Metric series
95.99
Ball screws — Part 2: Nominal diameters, leads, nut dimensions and mounting bolts — Metric series
60.60
Ball screws — Part 3: Acceptance conditions and acceptance tests
95.99
Ball screws — Part 3: Acceptance conditions and acceptance tests
90.93
Ball screws — Part 4: Static axial rigidity
90.93
Ball screws — Part 5: Static and dynamic axial load ratings and operational life
90.93
Ball screws — Nominal diameters and basic leads — Metric and inch series
95.99
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications
95.99
Modular units for machine tool construction — Tenon drive and flanges for mounting multi- spindle heads
90.93
Modular units for machine tool construction — Integral way columns
90.93
Modular units for machine tool construction — Integral way columns — Amendment 1
60.60
Modular units for machine tool construction — Spindle units
90.93
Modular units for machine tool construction — Support brackets
90.93
Test conditions for vertical turning and boring lathes with one or two columns — Testing of the accuracy — Part 0: General introduction
95.99
Test conditions for vertical turning and boring lathes with one or two columns — Testing of the accuracy — Part 1: Lathes with a single fixed or movable table
95.99
Conditions of acceptance for external cylindrical centreless grinding machines — Testing of the accuracy
95.99
Modular units for machine tool construction — Integral way columns — Floor-mounted type
90.93
Modular units for machine tool construction — Integral way columns — Floor-mounted type — Amendment 1
60.60
Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of accuracy
95.99
Machine tools — Presentation of lubrication instructions
90.93
Machine tools — Lubrication systems
90.93
Test conditions of mechanical dividing heads for machine tools — Testing of the accuracy
95.99
Open front mechanical power presses — Capacity ratings and dimensions
90.93
Acceptance conditions of open front mechanical power presses — Testing of the accuracy
90.93
Modular units for machine tools — Workholding pallets — Part 1: Workholding pallets up to 800 mm nominal size
90.93
Modular units for machine tools — Workholding pallets — Part 2: Workholding pallets of nominal size greater than 800 mm
90.93
Modular units for machine tools — Workholding pallets — Part 2: Workholding pallets of nominal size greater than 800 mm — Technical Corrigendum 1
60.60
Open front mechanical power presses — Vocabulary
90.93
Machine tools — Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force — Characteristics and dimensions
90.93
Machine tools — Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force — Characteristics and dimensions
90.93
Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
95.99
Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
90.93
Machine tools — Environmental evaluation of machine tools — Part 2: Methods for measuring energy supplied to machine tools and machine tool components
90.93
Machine tools — Environmental evaluation of machine tools — Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency
60.60
Machine tools — Environmental evaluation of machine tools — Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency
90.20
Machine tools — Environmental evaluation of machine tools — Part 5: Principles for testing woodworking machine tools with respect to energy supplied
60.60
Machine tools — Ball splines — Part 1: General characteristics and requirements
90.93
Machine tools — Ball splines — Part 2: Dynamic and static load ratings and rating life
90.93
Production equipment for microsystems — Interface between end effector and handling system
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.