Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Dimensions of rectangular refractory bricks
|
95.99 | ISO/TC 33 |
Refractory products — Determination of pyrometric cone equivalent (refractoriness)
|
90.93 | ISO/TC 33 |
Terminology for refractories
|
90.93 | ISO/TC 33 |
Vocabulary for the refractories industry
|
95.99 | ISO/TC 33 |
Refractory products — Classification of dense shaped refractory products
|
95.99 | ISO/TC 33 |
Dimensions of refractory arch bricks
|
95.99 | ISO/TC 33 |
Refractory products — Determination of refractoriness-under-load (differential - with rising temperature)
|
95.99 | ISO/TC 33 |
Refractory products — Determination of refractoriness under load (Differential — With rising temperature)
|
95.99 | ISO/TC 33 |
Refractory products — Determination of refractoriness-under-load — Differential method with rising temperature
|
95.99 | ISO/TC 33 |
Refractory products — Determination of refractoriness under load — Differential method with rising temperature
|
90.93 | ISO/TC 33 |
Monolithic (unshaped) refractory products — Part 1: Introduction and classification
|
90.93 | ISO/TC 33 |
Monolithic (unshaped) refractory products — Part 2: Sampling for testing
|
90.93 | ISO/TC 33 |
Monolithic (unshaped) refractory products — Part 3: Characterization as received
|
90.93 | ISO/TC 33 |
Monolithic (unshaped) refractory products — Part 4: Determination of consistency of castables
|
90.92 | ISO/TC 33 |
Monolithic (unshaped) refractory products — Part 5: Preparation and treatment of test pieces
|
90.92 | ISO/TC 33 |
Monolithic (unshaped) refractory products — Part 6: Measurement of physical properties
|
90.93 | ISO/TC 33 |
Monolithic (unshaped) refractory products — Part 7: Tests on pre-formed shapes
|
90.93 | ISO/TC 33 |
Monolithic (unshaped) refractory products — Part 8: Determination of complementary properties
|
90.93 | ISO/TC 33 |
Refractory products — Classification of prepared unshaped refractory materials (dense and insulating)
|
95.99 | ISO/TC 33 |
Prepared unshaped refractory materials (dense and insulating) — Classification
|
95.99 | ISO/TC 33 |
Shaped insulating refractory products — Classification
|
95.99 | ISO/TC 33 |
Shaped insulating refractory products — Classification
|
95.99 | ISO/TC 33 |
Shaped insulating refractory products — Classification
|
90.93 | ISO/TC 33 |
Dense shaped refractory products — Nomenclature of manufacturing processes
|
95.99 | ISO/TC 33 |
Shaped insulating refractory products — Determination of the permanent change in dimensions on heating
|
95.99 | ISO/TC 33 |
Shaped insulating refractory products — Determination of permanent change in dimensions on heating
|
95.99 | ISO/TC 33 |
Shaped insulating refractory products — Determination of permanent change in dimensions on heating
|
90.60 | ISO/TC 33 |
Dense shaped refractory products — Determination of the permanent changes in dimensions on heating
|
95.99 | ISO/TC 33 |
Dense shaped refractory products — Determination of permanent change in dimensions on heating
|
90.92 | ISO/TC 33 |
Dense shaped refractory products — Determination of permanent change in dimensions on heating
|
40.20 | ISO/TC 33 |
Refractory products — Determination of creep in compression
|
90.93 | ISO/TC 33 |
Refractory products — Determination of modulus of rupture at elevated temperatures
|
90.92 | ISO/TC 33 |
Refractory products — Determination of modulus of rupture at ambient temperature
|
95.99 | ISO/TC 33 |
Dense and insulating shaped refractory products — Determination of modulus of rupture at ambient temperature
|
90.92 | ISO/TC 33 |
Dense and insulating shaped refractory products — Determination of modulus of rupture at ambient temperature
|
50.00 | ISO/TC 33 |
Shaped insulating refractory products — Determination of bulk density and true porosity
|
95.99 | ISO/TC 33 |
Shaped insulating refractory products — Determination of bulk density and true porosity
|
90.93 | ISO/TC 33 |
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
|
95.99 | ISO/TC 33 |
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
|
95.99 | ISO/TC 33 |
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
|
90.92 | ISO/TC 33 |
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
|
40.20 | ISO/TC 33 |
Refractory materials — Determination of true density
|
90.93 | ISO/TC 33 |
Refractory bricks — Dimensions — Part 1: Rectangular bricks
|
90.93 | ISO/TC 33 |
Refractory bricks — Dimensions — Part 2: Arch bricks
|
90.93 | ISO/TC 33 |
Refractory bricks — Dimensions — Part 3: Rectangular checker bricks for regenerative furnaces
|
90.93 | ISO/TC 33 |
Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs
|
95.99 | ISO/TC 33 |
Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs
|
90.20 | ISO/TC 33 |
Refractory bricks — Dimensions — Part 5: Skewbacks
|
90.93 | ISO/TC 33 |
Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters
|
95.99 | ISO/TC 33 |
Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters
|
90.20 | ISO/TC 33 |
Shaped refractory products — Sampling and acceptance testing
|
90.93 | ISO/TC 33 |
Refractory bricks for use in rotary kilns — Dimensions
|
90.93 | ISO/TC 33 |
Refractory products — Sampling of raw materials and unshaped products — Part 1: Sampling scheme
|
90.20 | ISO/TC 33 |
Refractory materials — Determination of bulk density of granular materials (grain density)
|
95.99 | ISO/TC 33 |
Refractory materials — Determination of bulk density of granular materials (grain density)
|
60.60 | ISO/TC 33 |
Dense, shaped refractory products — Determination of permeability to gases
|
90.93 | ISO/TC 33 |
Dense shaped refractory products — Determination of resistance to sulfuric acid
|
90.20 | ISO/TC 33 |
Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire method (cross-array)
|
95.99 | ISO/TC 33 |
Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods (cross-array and resistance thermometer)
|
90.93 | ISO/TC 33 |
Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method (parallel)
|
95.99 | ISO/TC 33 |
Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method (parallel)
|
90.93 | ISO/TC 33 |
Shaped insulating refractory products — Determination of cold crushing strength
|
95.99 | ISO/TC 33 |
Shaped insulating refractory products — Determination of cold crushing strength
|
90.93 | ISO/TC 33 |
Refractory bricks for use in rotary kilns — Hot-face identification marking
|
90.20 | ISO/TC 33 |
Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
|
90.92 | ISO/TC 33 |
Dense shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
|
40.99 | ISO/TC 33 |
Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
|
90.20 | ISO/TC 33 |
Dense, shaped refractory products — Test methods for products containing carbon
|
90.20 | ISO/TC 33 |
Refractory products — Classification of dense, shaped acid-resisting products
|
90.93 | ISO/TC 33 |
Basic refractory products — Classification — Part 1: Products containing less than 7 % residual carbon
|
95.99 | ISO/TC 33 |
Classification of dense shaped refractory products — Part 1: Alumina-silica
|
90.20 | ISO/TC 33 |
Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon
|
90.20 | ISO/TC 33 |
Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon — Technical Corrigendum 1
|
60.60 | ISO/TC 33 |
Classification of dense shaped refractory products — Part 3: Basic products containing from 7 % to 50 % residual carbon
|
90.20 | ISO/TC 33 |
Classification of dense shaped refractory products — Part 4: Special products
|
95.99 | ISO/TC 33 |
Classification of dense shaped refractory products — Part 4: Special products
|
90.20 | ISO/TC 33 |
Refractory products — Methods of test for ceramic fibre products
|
90.60 | ISO/TC 33 |
Refractory products — Determination of resistance to carbon monoxide
|
90.93 | ISO/TC 33 |
Chemical analysis of refractory products by XRF — Fused cast bead method
|
95.99 | ISO/TC 33 |
Chemical analysis of refractory products by X-ray fluorescence (XRF) — Fused cast-bead method
|
90.93 | ISO/TC 33 |
Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 1: Dimensions and conformity to drawings
|
90.93 | ISO/TC 33 |
Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 2: Corner and edge defects and other surface imperfections
|
90.93 | ISO/TC 33 |
Methods of test for refractory products — Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration
|
90.60 | ISO/TC 33 |
Refractory mortars — Part 1: Determination of consistency using the penetrating cone method
|
90.93 | ISO/TC 33 |
Refractory mortars — Part 2: Determination of consistency using the reciprocating flow table method
|
90.93 | ISO/TC 33 |
Refractory mortars — Part 3: Determination of joint stability
|
90.93 | ISO/TC 33 |
Refractory mortars — Part 4: Determination of flexural bonding strength
|
90.93 | ISO/TC 33 |
Refractory mortars — Part 5: Determination of grain size distribution (sieve analysis)
|
90.93 | ISO/TC 33 |
Refractory mortars — Part 6: Determination of moisture content of ready-mixed mortars
|
90.93 | ISO/TC 33 |
Refractory mortars — Part 7: Determination of permanent change in dimensions on heating
|
60.60 | ISO/TC 33 |
Chemical analysis of refractory material glass and glazes — Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline
|
90.92 | ISO/TC 33 |
Chemical analysis of refractory material glass and glazes — Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline
|
30.99 | ISO/TC 33 |
Preparation of silicon carbide and similar materials for analysis by ISO 12677 X-ray fluorescence (XRF) — Fused cast-bead method
|
90.93 | ISO/TC 33 |
Phase quantitative analysis of residual quartz in silica bricks — X-ray diffraction method
|
40.60 | ISO/TC 33 |
Methods of test for dense shaped refractory products — Determination of resistance to abrasion at ambient temperature
|
90.93 | ISO/TC 33 |
Monolithic refractory products — Determination of resistance to explosive spalling
|
90.93 | ISO/TC 33 |
Refractory materials — Determination of abrasion resistance at elevated temperature
|
90.93 | ISO/TC 33 |
Refractory products — Determination of thermal expansion
|
90.92 | ISO/TC 33 |
Refractory test-piece preparation — Gunning refractory panels by wet gunning techniques
|
90.92 | ISO/TC 33 |
Refractory test piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns
|
95.99 | ISO/TC 33 |
Refractory test-piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns
|
95.99 | ISO/TC 33 |
Refractory test-piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns
|
60.60 | ISO/TC 33 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
|
90.93 | ISO/TC 33 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
|
90.93 | ISO/TC 33 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
|
90.93 | ISO/TC 33 |
Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1: General information and sample preparation
|
95.99 | ISO/TC 33 |
Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon — Part 1: General information, terminology and sample preparation
|
60.60 | ISO/TC 33 |
Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
|
95.99 | ISO/TC 33 |
Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon — Part 2: Determination of volatile components, total carbon, free carbon, silicon carbide, total and free silicon, free and surface silica
|
60.60 | ISO/TC 33 |
Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
|
95.99 | ISO/TC 33 |
Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
|
60.60 | ISO/TC 33 |
Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon — Part 4: XRD methods
|
60.60 | ISO/TC 33 |
Chemical analysis of refractories containing alumina, zirconia and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents and dissolution
|
90.93 | ISO/TC 33 |
Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
|
90.93 | ISO/TC 33 |
Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES)
|
90.93 | ISO/TC 33 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and gravimetric silica
|
90.93 | ISO/TC 33 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
|
90.93 | ISO/TC 33 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) — Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
|
90.93 | ISO/TC 33 |
Refractories — Test methods for thermal shock resistance
|
60.60 | ISO/TC 33 |
Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
|
60.60 | ISO/TC 33 |
Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods
|
90.93 | ISO/TC 33 |
Refractories — Determination of dynamic Young’s modulus (MOE) at elevated temperatures by impulse excitation of vibration
|
60.60 | ISO/TC 33 |
Refractory products — Determination of compressive strength at elevated temperature
|
60.60 | ISO/TC 33 |
Refractory products — Determination of reduced species in carbon containing refractories by XRD
|
60.60 | ISO/TC 33 |
Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
|
90.93 | ISO/TC 33 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.