ISO/TC 61/SC 12 - Thermosetting materials

Фильтр :

Опубликовано

В стадии разработки

Отозвано

Удалено

Стандарт и/или проект находящийся в компетенции ISO/TC 61/SC 12 Секретариата	Этап	ICS
ISO 59:1976 Plastics — Phenolic mouldings — Determination of acetone-soluble matter	95.99	83.080.10
ISO 60:1977 Plastics — Determination of apparent density of material that can be poured from a specified funnel	95.99	83.080.10
ISO 60:2023 Plastics — Determination of apparent density of material that can be poured from a specified funnel	60.60	83.080.10
ISO 61:1976 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel	95.99	83.080.10
ISO 61:2023 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel	60.60	83.080.10
ISO 119:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method	90.93	83.080.10
ISO 120:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method	90.93	83.080.10
ISO 172:1978 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia	90.93	83.080.10
ISO 295:1974 Plastics — Compression moulding test specimens of thermosetting materials	95.99	83.080.10
ISO 295:1991 Plastics — Compression moulding of test specimens of thermosetting materials	95.99	83.080.10
ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials	90.93	83.080.10
ISO 308:1981 Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)	95.99	83.080.10
ISO 308:1994 Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)	90.93	83.080.10
ISO 584:1982 Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)	90.93	83.080.10
ISO 800:1977 Plastics — Phenolic moulding materials — Specification	95.99	83.080.10
ISO 800:1992 Plastics — Phenolic moulding materials — Specification	95.99	83.080.10
ISO 2112:1977 Plastics — Aminoplastic moulding materials — Specification	95.99	83.080.10
ISO 2112:1990 Plastics — Aminoplastic moulding materials — Specification	95.99	83.080.10
ISO 2114:1974 Plastics — Unsaturated polyester resins — Determination of acid value	95.99	83.080.10
ISO 2114:1996 Plastics — Unsaturated polyester resins — Determination of partial acid value and total acid value	95.99	83.080.10
ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value	90.93	83.080.10 87.060.20
ISO 2535:1974 Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C	95.99	83.080.10
ISO 2535:1997 Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C	95.99	83.080.10
ISO 2535:2001 Plastics — Unsaturated-polyester resins — Measurement of gel time at ambient temperature	90.93	83.080.10
ISO 2554:1974 Plastics — Unsaturated polyester resins — Determination of hydroxyl value	95.99	83.080.10
ISO 2554:1997 Plastics — Unsaturated polyester resins — Determination of hydroxyl value	90.93	83.080.10
ISO 2577:1984 Plastics — Thermosetting moulding materials — Determination of shrinkage	95.99	83.080.10
ISO 2577:2007 Plastics — Thermosetting moulding materials — Determination of shrinkage	90.93	83.080.10
ISO 3001:1978 Plastics — Epoxide compounds — Determination of epoxide equivalent	95.99	83.080.10
ISO 3001:1997 Plastics — Epoxy compounds — Determination of epoxy equivalent	95.99	83.080.10
ISO 3001:1999 Plastics — Epoxy compounds — Determination of epoxy equivalent	90.93	83.080.10
ISO 3521:1976 Plastics — Polyester and epoxy casting resins — Determination of total volume shrinkage	95.99	83.080.10
ISO 3521:1997 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage	90.93	83.080.10
ISO 3521:1997/Cor 1:2003 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage — Technical Corrigendum 1	60.60	83.080.10
ISO 3671:1976 Plastics — Aminoplastic moulding materials — Determination of volatile matter	95.99	83.080.10
ISO 3671:2023 Plastics — Aminoplastic moulding materials — Determination of volatile matter	60.60	83.080.10
ISO 3672-1:1979 Plastics — Unsaturated polyester resins — Part 1: Designation	95.99	83.080.10
ISO 3672-1:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 1: Designation system	90.93	83.080.10
ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties	90.93	83.080.10
ISO 3673-1:1980 Plastics — Epoxide resins — Part 1: Designation	95.99	83.080.10
ISO 3673-1:1996 Plastics — Epoxy resins — Part 1: Designation	90.93	83.080.10
ISO 3673-2:1999 Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties	95.99	83.080.10
ISO 3673-2:2007 Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties	95.99	83.080.10
ISO 3673-2:2012 Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins	90.93	83.080.10
ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method	60.60	83.080.10
ISO 4573:1978 Plastics — Epoxide resins and glycidyl esters - Determination of inorganic chlorine (Under revision ISO 11376)	95.99	83.080.10
ISO 4583:1978 Plastics — Epoxy resins and related materials — Determination of easily saponifiable chlorine	95.99	83.080.10
ISO 4583:1998 Plastics — Epoxy resins and related materials — Determination of easily saponifiable chlorine	95.99	83.080.10
ISO 4597-1:1983 Plastics — Hardeners and accelerators for epoxide resins — Part 1: Designation	95.99	83.080.10
ISO 4597-1:2005 Plastics — Hardeners and accelerators for epoxy resins — Part 1: Designation	90.93	83.080.10
ISO 4614:1977 Plastics — Melamine-formaldehyde mouldings — Determination of extractable formaldehyde	90.93	83.080.10
ISO 4615:1979 Plastics — Unsaturated polyesters and epoxide resins — Determination of total chlorine content	90.93	83.080.10
ISO/DIS 4764 Plastics-Polyols for Use in the production of polyurethanes — Determination of degree of unsaturation by using Iodine method	40.99	83.080.10
ISO 4895:1987 Plastics — Liquid epoxide resins — Determination of tendency to crystallize	95.99	83.080.10
ISO 4895:1997 Plastics — Liquid epoxy resins — Determination of tendency to crystallize	95.99	83.080.10
ISO 4895:2014 Plastics — Liquid epoxy resins — Determination of tendency to crystallize	90.93	83.080.10
ISO 4896:1979 Plastics — Melamine/phenolic moulding materials — Specification	95.99	83.080.10
ISO 4896:1990 Plastics — Melamine/phenolic moulding materials — Specification	95.99	83.080.10
ISO 4901:1985 Reinforced plastics based on unsaturated polyester resins — Determination of residual styrene monomer content	95.99	83.120
ISO 4901:2011 Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography	90.93	83.120
ISO 7327:1994 Plastics — Hardeners and accelerators for epoxide resins — Determination of free acid in acid anhydride	90.93	83.080.10
ISO 7808:1992 Plastics — Thermosetting moulding materials — Determination of transfer flow	90.93	83.080.10
ISO/TR 8244:1988 Plastics — Phenolic resins — Basis for classification	95.99	83.080.10
ISO 8618:1987 Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter	95.99	83.080.10
ISO 8618:1995 Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter	95.99	83.080.10
ISO 8619:1988 Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate	95.99	83.080.10
ISO 8619:1995 Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate	95.99	83.080.10
ISO 8619:2003 Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate	90.93	83.080.10
ISO 8620:1986 Plastics — Phenolic resin powder — Sieve analysis using air-jet sieve apparatus	95.99	83.080.10
ISO 8974:1988 Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography	95.99	83.080.10
ISO 8974:1997 Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography	95.99	83.080.10
ISO 8974:2002 Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography	90.93	83.080.10
ISO 8975:1989 Plastics — Phenolic resins — Determination of pH	90.93	83.080.10
ISO 8987:1988 Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate	95.99	83.080.10
ISO 8987:1995 Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate	95.99	83.080.10
ISO 8987:2005 Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate	90.93	83.080.10
ISO 8988:1989 Plastics — Phenolic resins — Determination of hexamethylenetetramine content	95.99	83.080.10
ISO 8988:1995 Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method and perchloric acid method	95.99	83.080.10
ISO 8988:2006 Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method, perchloric acid method and hydrochloric acid method	90.93	83.080.10
ISO 8989:1988 Plastics — Liquid phenolic resins — Determination of water miscibility	95.99	83.080.10
ISO 8989:1995 Plastics — Liquid phenolic resins — Determination of water miscibility	90.93	83.080.10
ISO 9369:1997 Plastics — Basic materials for polyurethanes — Pure isocyanates — Analysis of isocyanate groups	95.99	83.080.10
ISO 9371:1990 Plastics — Phenolic resins in the liquid state or in solution — Determination of viscosity	95.99	83.080.10
ISO/TR 9372:1993 Plastics — Basic materials for polyurethanes — Determination of the amounts of 2,4- and 2,6-isomers in toluenediisocyanate by infrared spectroscopy	95.99	83.080.10
ISO 9396:1989 Plastics — Phenolic resins — Determination of the gel time at a given temperature using automatic apparatus	95.99	83.080.10
ISO 9396:1997 Plastics — Phenolic resins — Determination of the gel time of resols under specific conditions using automatic apparatus	90.93	83.080.10
ISO 9397:1989 Plastics — Phenolic resins — Determination of free formaldehyde content	95.99	83.080.10
ISO 9397:1995 Plastics — Phenolic resins — Determination of free-formaldehyde content — Hydroxylamine hydrochloride method	95.99	83.080.10
ISO 9702:1996 Plastics — Amine epoxide hardeners — Determination of primary, secondary and tertiary amine group nitrogen content	90.93	83.080.10
ISO 9771:1989 Plastics — Phenolic resins — Determination of reactivity of resols under acid conditions	95.99	83.080.10
ISO 9771:1995 Plastics — Phenolic resins — Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions	90.93	83.080.10
ISO 9944:1990 Plastics — Phenolic resins — Determination of electrical conductivity of resin extracts	90.93	83.080.10
ISO 9944:1990/Cor 1:1997 Plastics — Phenolic resins — Determination of electrical conductivity of resin extracts — Technical Corrigendum 1	60.60	83.080.10
ISO 10082:1991 Plastics — Phenolic resins — Definitions and test methods	95.99	83.080.10
ISO 10082:1999 Plastics — Phenolic resins — Classification and test methods	90.93	83.080.10
ISO 10724-1:1998 Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens	90.93	83.080.10
ISO 10724-2:1998 Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates	90.93	83.080.10
ISO 10724:1994 Plastics — Thermosetting moulding materials — Injection moulding of multipurpose test specimens	95.99	83.080.10
ISO 11248:1993 Plastics — Thermosetting moulding materials — Evaluation of short-term performance at elevated temperatures	90.93	83.080.10
ISO 11376:1997 Plastics — Epoxy resins and glycidyl esters — Determination of inorganic chlorine	95.99	83.080.10
ISO 11401:1993 Plastics — Phenolic resins — Separation by liquid chromatography	90.93	83.080.10
ISO 11402:1993 Plastics — Condensation resins — Determination of free formaldehyde	95.99	83.080.10
ISO 11402:2004 Phenolic, amino and condensation resins — Determination of free-formaldehyde content	90.93	83.080.10
ISO 11409:1993 Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry	90.93	83.080.10
ISO 13651:1996 Plastics — Epoxy resins and related materials — Determination of total saponifiable chlorine	95.99	83.080.10
ISO 14322:2012 Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry	95.99	83.080.10
ISO 14322:2018 Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)	90.93	83.080.10
ISO 14526-1:1999 Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 1: Designation system and basis for specifications	90.93	83.080.10
ISO 14526-2:1999 Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 2: Preparation of test specimens and determination of properties	90.93	83.080.10
ISO 14526-3:1999 Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 3: Requirements for selected moulding compounds	90.93	83.080.10
ISO 14527-1:1999 Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 1: Designation system and basis for specifications	90.93	83.080.10
ISO 14527-2:1999 Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 2: Preparation of test specimens and determination of properties	90.93	83.080.10
ISO 14527-3:1999 Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 3: Requirements for selected moulding compounds	90.93	83.080.10
ISO 14528-1:1999 Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 1: Designation system and basis for specifications	90.93	83.080.10
ISO 14528-2:1999 Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 2: Preparation of test specimens and determination of properties	90.93	83.080.10
ISO 14528-3:1999 Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 3: Requirements for selected moulding compounds	90.93	83.080.10
ISO 14529-1:1999 Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 1: Designation system and basis for specifications	90.93	83.080.10
ISO 14529-2:1999 Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 2: Preparation of test specimens and determination of properties	90.93	83.080.10
ISO 14529-3:1999 Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 3: Requirements for selected moulding compounds	90.93	83.080.10
ISO 14530-1:1999 Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 1: Designation system and basis for specifications	90.93	83.080.10
ISO 14530-2:1999 Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 2: Preparation of test specimens and determination of properties	90.93	83.080.10
ISO 14530-3:1999 Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 3: Requirements for selected moulding compounds	90.93	83.080.10
ISO 14848:1998 Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C	90.93	83.080.10
ISO 14849:1999 Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Indophenol method	90.93	83.080.10
ISO 14896:2000 Plastics — Polyurethane raw materials — Determination of isocyanate content	95.99	83.080.10
ISO 14896:2000/Cor 1:2005 Plastics — Polyurethane raw materials — Determination of isocyanate content — Technical Corrigendum 1	95.99	83.080.10
ISO 14896:2006 Plastics — Polyurethane raw materials — Determination of isocyanate content	95.99	83.080.10
ISO 14896:2006/Amd 1:2007 Plastics — Polyurethane raw materials — Determination of isocyanate content — Amendment 1: Acceptable variations in the procedure for method B	95.99	83.080.10
ISO 14896:2009 Plastics — Polyurethane raw materials — Determination of isocyanate content	90.93	83.080.10
ISO 14897:2000 Plastics — Polyols for use in the production of polyurethane — Determination of water content	95.99	83.080.10
ISO 14897:2002 Plastics — Polyols for use in the production of polyurethane — Determination of water content	95.99	83.080.10
ISO 14897:2023 Plastics — Polyols for use in the production of polyurethanes — Determination of water content	60.60	83.080.10
ISO 14898:1999 Plastics — Aromatic isocyanates for use in the production of polyurethane — Determination of acidity	90.93	83.080.10
ISO 14898:1999/Amd 1:2011 Plastics — Aromatic isocyanates for use in the production of polyurethane — Determination of acidity — Amendment 1	60.60	83.080.10
ISO 14899:2001 Plastics — Polyols for use in the production of polyurethane — Determination of basicity	95.99	83.080.10
ISO 14899:2022 Plastics — Polyols for use in the production of polyurethanes — Determination of basicity	60.60	83.080.10
ISO 14900:2001 Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number	95.99	83.080.10
ISO 14900:2001/Cor 1:2005 Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number — Technical Corrigendum 1	95.99	83.080.10
ISO 14900:2017 Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number	95.99	83.080.10
ISO 14900:2023 Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number	60.60	83.080.10
ISO 15028:2004 Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine	95.99	83.080.10
ISO 15028:2014 Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine	90.93	83.080.10
ISO 15038:1999 Plastics — Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials — Determination of active-oxygen content	90.93	83.040.30
ISO 15063:2004 Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy	95.99	83.080.10
ISO 15063:2011 Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy	90.93	83.080.10
ISO 15064:2004 Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate	95.99	83.080.10
ISO 15064:2010 Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate	95.99	83.080.10
ISO 15064:2017 Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate (TDI)	90.93	83.080.10
ISO 15252-1:1999 Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 1: Designation system and basis for specifications	90.93	83.080.10
ISO 15252-2:1999 Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 2: Preparation of test specimens and determination of properties	90.93	83.080.10
ISO 15252-3:1999 Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 3: Requirements for selected moulding compounds	90.93	83.080.10
ISO 17710:2002 Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration	95.99	83.080.10
ISO 17710:2023 Plastics — Polyols for use in the production of polyurethanes — Determination of degree of unsaturation by microtitration	60.60	83.080.10
ISO 18280:2005 Plastics — Epoxy resins — Test methods	95.99	83.080.10
ISO 18280:2010 Plastics — Epoxy resins — Test methods	90.93	83.080.10
ISO 20368:2017 Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy	90.93	83.080.10
ISO 21048:2004 Plastics — Epoxy resins — Determination of 1,2-glycol content	95.99	83.080.10
ISO 21048:2014 Plastics — Epoxy resins — Determination of 1,2-glycol content	90.93	83.080.10
ISO 21257:2018 Plastics — Polymer polyols for use in the production of polyurethane — Determination of the residual acrylonitrile and styrene monomer content by gas chromatography	90.60	83.080.10
ISO 21318:2007 Plastics — Epoxy resins — Determination of electrical conductivity of aqueous resin extracts	90.93	83.080.10
ISO 21627-1:2002 Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine	95.99	83.080.10
ISO 21627-1:2009 Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine	90.93	83.080.10
ISO 21627-2:2002 Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine	95.99	83.080.10
ISO 21627-2:2009 Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine	90.93	83.080.10
ISO 21627-3:2002 Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine	95.99	83.080.10
ISO 21627-3:2009 Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine	90.93	83.080.10
ISO/WD 24862 Plastics-Polyols for Use in the production of polyurethanes-Determination of degree of unsaturation for polyols by Raman spectrometric method	20.60
ISO/WD TR 24938 Plastics - Low Temperature cracking index test of thermosetting resin based material – Embedded metal block method	20.60
ISO 25761:2008 Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen	95.99	83.080.10
ISO 25761:2014 Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen	90.93	83.080.10
ISO 26603:2008 Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine	95.99	83.080.10
ISO 26603:2017 Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine	90.93	83.080.10

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.