International Standard
ISO 14527-1:1999
Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 1: Designation system and basis for specifications
Reference number
ISO 14527-1:1999
Версия 1
International Standard
ISO 14527-1:1999
недоступно на русском языке
Опубликовано (Версия 1, 1999)
Последний раз этот стандарт был пересмотрен в  2020. Поэтому данная версия остается актуальной.

ISO 14527-1:1999

ISO 14527-1:1999
CHF 42
Пересчитать швейцарские франки (CHF) в ваша валюта


1.1 This part of ISO 14527 establishes a data block system for the designation of urea-formaldehyde and

urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs).

1.2 The various types of UF- and UF/MF-PMC are differentiated from each other by a classification system

based on information about the filler/reinforcement type and content, the intended method of processing, any

special properties and those of the special properties used specifically for designation purposes (designatory


1.3 This part of ISO 14527 is applicable to all UF- and UF/MF-PMCs ready for normal use in the form of powder,

granules or ground material.

1.4 It is not intended to imply that materials having the same designation necessarily give the same

performance. This part of ISO 14527 does not provide engineering data, performance data or data on processing

conditions which may be required to specify a material for a particular application and/or method of processing. If

such additional properties are required, they shall be determined in accordance with the test methods specified in

ISO 14527-2, if suitable.

1.5 Whenever general requirement data, as covered by ISO 14527-3, need to be indicated, this is also done

using this data block system.

1.6 To ensure that code-letters and code-numbers remain unambiguous, and to avoid conflicts within the

system, any new code-letters or code-numbers for use in data block 1, 2 or 3 shall be approved before use by the

secretariats of ISO/TC 61/SC 1, SC 12 and SC 13.

Общая информация

  •  : Опубликовано
     : 1999-11
    : Подтверждение действия между-народного стандарта [90.93]
  •  : 1
  • ISO/TC 61/SC 12
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)