Ссылочный номер
ISO 1519:2002
ISO 1519:2002
Paints and varnishes — Bend test (cylindrical mandrel)
Версия 2
2002-03
В время отменен
ISO 1519:2002
28226
Отозвано (Версия 2, 2002)

Тезис

This International Standard specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastic substrate when subjected to bending round a cylindrical mandrel under standard conditions.

For a multicoat system, each coat may be tested separately or the complete system may be tested.

The method specified may be carried out either as a "go/no go" test, by carrying out the test with a single specified size of mandrel, to assess compliance with a particular requirement, or by repeating the procedure using successively smaller mandrels to determine the diameter of the first mandrel over which the coating cracks and/or becomes detached from the substrate.

Two types of apparatus are specified, type 1 being appropriate for use on test panels of thickness up to 0,3 mm, and type 2 for use on test panels of thickness up to 1,0 mm. Both types of apparatus have been found to give similar results with the same coating, but normally only one will be used for testing a given product.

Общая информация

  •  : Отозвано
     : 2002-03
    : Отмена международного стандарта [95.99]
  •  : 2
  • ISO/TC 35/SC 9
    87.040 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ