Ссылочный номер
ISO/TS 22476-10:2005
Технические спецификации
ISO/TS 22476-10:2005
Geotechnical investigation and testing — Field testing — Part 10: Weight sounding test
Версия 1
2005-05
В время отменен
ISO/TS 22476-10:2005
37559
Отозвано (Версия 1, 2005)

Тезис

ISO/TS 22476-10:2005 specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations according to EN 1997-1 and EN 1997-2.

The test method consists of placing the test specimen in the direct shear device, applying a pre-determined normal stress, providing for draining (and wetting if required) of the test specimen, or both, consolidating the specimen under normal stress, unlocking the frames that hold the specimen, and displacing one frame horizontally with respect to the other at a constant rate of shear-deformation and measuring the shearing force, and horizontal displacements as the specimen is sheared. Shearing is applied slowly enough to allow excess pore pressures to dissipate by drainage so that effective stresses are equal to total stresses.

Direct shear tests are used in earthworks and foundation engineering for the determination of the effective shear strength of soils.

Общая информация

  •  : Отозвано
     : 2005-05
    : Отмена международного стандарта [95.99]
  •  : 1
  • ISO/TC 182
    93.020 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ