International Standard
ISO/TS 16281:2008
Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings
Reference number
ISO/TS 16281:2008
Версия 1
2008-06
© ISO 2024
International Standard
Предпросмотр
Опубликовано (Версия 1, 2008)
Последний раз этот стандарт был пересмотрен в  2019. Поэтому данная версия остается актуальной.

ISO/TS 16281:2008

Формат
Язык
CHF 129
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

ISO/TS 16281:2008 contains recommendations for the calculation of the modified reference rating life taking into consideration lubrication, contamination and fatigue load limit of the bearing material, as well as tilting or misalignment, operating clearance of the bearing and internal load distribution on rolling elements. The calculation method provided in ISO/TS 16281:2008 covers influencing parameters additional to those described in ISO 281.

The directions and limitations given in ISO 281 apply to ISO/TS 16281:2008. The calculation methods pertain to the fatigue life of the bearings. Other mechanisms of failure, like wear or microspalling (gray staining), lie outside the scope of ISO/TS 16281:2008.

ISO/TS 16281:2008 applies to tilted single-row radial ball bearings, subjected to radial and axial load, and with radial clearance and tilt taken into account. It also applies to tilted single-row roller bearings, subjected to pure radial load and with radial clearance, edge stress and tilt taken into account. References to methods for the analysis of the internal load distribution under general load are given.

The analysis of internal load distribution and modified reference rating life for multi-row bearings or bearings of a more complex geometry can be derived from the equations given in ISO/TS 16281:2008. For these bearings, the load distribution for each individual row has to be considered.

ISO/TS 16281:2008 is primarily intended to be used for computer programs and together with ISO 281 covers the information needed for life calculations. For accurate life calculations under the operating conditions specified above, it is recommended that either ISO/TS 16281:2008 or advanced computer calculations provided by bearing manufacturers, for determining the dynamic equivalent reference load under different loading conditions, be used.

Общая информация

  • Текущий статус
     : Опубликовано
    Дата публикации
     : 2008-06
    Этап
    : Между-народный стандарт подлежит пересмотру [90.92]
  • Версия
     : 1
  • Технический комитет :
    ISO/TC 4/SC 8
    ICS :
    21.100.20 
  • RSS обновления

Новая версия в процессе разработки

Draft International Standard
ISO/DIS 16281
Rolling bearings – Methods for calculating the modified reference rating life for universally loaded rolling bearings
Reference number
ISO/DIS 16281
Версия 1
© ISO 2024
Draft
International Standard
Предпросмотр

ISO/DIS 16281

Rolling bearings – Methods for calculating the modified reference rating life for universally loaded rolling bearings

ISO/DIS 16281

Формат
Язык
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

  2. Интернет-магазин
  3. Каталог стандартов
  4. МКС
  5. 21
  6. 21.100
  7. 21.100.20
  8. ISO/TS 16281:2008