Ссылочный номер
ISO 5597:2010
© ISO 2024
ISO 5597:2010
Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
Версия 2
2010-06
В время отменен
Отозвано (Версия 2, 2010)

Тезис

ISO 5597:2010 establishes the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder rod and piston seal housings for reciprocating applications in the following range of dimensions: cylinders 16 mm to 500 mm and rods 6 mm to 360 mm.

An additional range of seal housings is detailed in ISO 5597:2010 to meet the reduced envelope requirements of the 160 bar (16 MPa) compact series of ISO 6020-2; these smaller section seals require stricter piston rod and cylinder bore tolerances. The range of dimensions are as follows: cylinders 25 mm to 200 mm and rods 12 mm to 140 mm.

ISO 5597:2010 does not give details of seal design, since the manner of construction of seals varies with each manufacturer. The design and material of the seal and any incorporated anti-extrusion component are determined by conditions such as temperature and pressure.

ISO 5597:2010 applies only to the dimensional criteria of products manufactured in conformity with ISO 5597:2010; it does not apply to their functional characteristics.

Общая информация

  • Текущий статус
     : Отозвано
    Дата публикации
     : 2010-06
    Этап
    : Отмена международного стандарта [95.99]
  • Версия
     : 2
  • Технический комитет :
    ISO/TC 131/SC 7
    ICS :
    23.100.20 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

  2. Интернет-магазин
  3. Каталог стандартов
  4. МКС
  5. 23
  6. 23.100
  7. 23.100.20
  8. ISO 5597:2010