Filter :
Standard and/or project under the direct responsibility of ISO/TC 79/SC 6 Secretariat | Stage | ICS |
---|---|---|
Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 1: Chemical composition
|
95.99 | |
Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 2: Forms of products
|
95.99 | |
Aluminium and aluminium alloys — Chemical composition
|
90.92 | |
Composition of wrought products of aluminium and aluminium alloys — Chemical composition (per cent)
|
95.99 | |
Wrought aluminium and aluminium alloys — Chemical composition
|
50.20 | |
Mechanical property limits for rolled products of aluminium and aluminium alloys
|
95.99 | |
Mechanical property limits for extruded products of aluminium and aluminium alloys
|
95.99 | |
Mechanical property limits for rivet stock of aluminium and aluminium alloys
|
95.99 | |
Mechanical property limits for aluminium alloy forgings
|
95.99 | |
Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties
|
95.99 | |
Wrought aluminium, magnesium and their alloys — Selection of specimens and test pieces for mechanical testing
|
95.99 | |
Wrought aluminium and aluminium alloys — Drawn tubes — Mechanical properties
|
95.99 | |
Aluminium machining alloys — Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg
|
95.99 | |
Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) — Chemical composition and mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloy products — General conditions for inspection and delivery
|
95.99 | |
Wrought aluminium and aluminium alloys — Drawn round bars — Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
|
95.99 | |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
|
95.99 | |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
|
90.93 | |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
|
90.20 | |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 3: Strips — Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
|
90.20 | |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 4: Sheets and plates — Tolerances on form and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
|
90.20 | |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition
|
90.93 | |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
|
60.60 | |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
60.60 | |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on dimensions and form
|
95.99 | |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Tolerances on form and dimensions for extruded rectangular bars
|
60.60 | |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 4: Extruded profiles — Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Tolerances on form and dimensions for profiles
|
60.60 | |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 5: Extruded round, square and hexagonal bars — Tolerances on form and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 5: Extruded round, square and hexagonal bars — Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Tolerances on form and dimensions for round, square and hexagonal bars
|
60.60 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
|
90.92 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Tolerances on form and dimensions for round, square, rectangular and hexagonal tubes
|
50.20 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
|
95.99 | |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
|
60.60 | |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 1: Technical conditions for inspection and delivery
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery
|
60.60 | |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 2: Mechanical properties
|
60.60 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Drawn round bars and wires — Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Tolerances on form and dimensions for drawn rods/bars and wires
|
60.60 | |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 4: Drawn rectangular bars — Tolerances on form and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Drawn rectangular bars and wires — Tolerances on form and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Tolerances on form and dimensions for drawn rectangular bars and wires
|
60.60 | |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 5: Drawn square and hexagonal bars — Tolerances on form and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Drawn square and hexagonal bars and wires — Tolerances on form and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Tolerances on form and dimensions for drawn square and hexagonal bars and wires
|
60.60 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Drawn round tubes — Tolerances on form and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Tolerances on form and dimensions for drawn round tubes
|
60.60 | |
Wrought aluminium and aluminium alloy cold-drawn wire — Part 1: Technical conditions for inspection and delivery
|
95.99 | |
Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances
|
95.99 | |
Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances
|
90.93 | |
Wrought aluminium and aluminium alloys — Extruded round bars — Tolerances on shape and dimensions
|
95.99 | |
Wrought aluminium and aluminium alloys — Drawn round bars — Tolerances on shape and dimensions (All minus tolerances on diameter)
|
95.99 | |
Wrought aluminium and aluminium alloys — Sheet — Tolerances on shape and dimensions
|
95.99 |
No matching records found. Please try changing the filter settings.