Reference number
ISO 16362:2005
International Standard
ISO 16362:2005
Ambient air — Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
Edition 1
2005-02
Read sample
ISO 16362:2005
32201
Published (Edition 1, 2005)
This publication was last reviewed and confirmed in 2022. Therefore this version remains current.

ISO 16362:2005

ISO 16362:2005
32201
Language
Format
CHF 151
Convert Swiss francs (CHF) to your currency

Abstract

ISO 16362:2005 specifies sampling, cleanup and analysis procedures for the quantitative determination of low volatility (particle-bound) polycyclic aromatic hydrocarbons (PAHs) in ambient air. For sampling, a low-volume or a medium/high-volume sampling device may be used. Sampling times between 1 h and 24 h are possible. The sampling volume flow rates can range from 1 m/h to 4 m/h ("low volume sampler") or from 10 m/h to about 90 m/h ("medium/high-volume sampler"). In any case, the linear face velocity at the collection filter should range between about 0,5 m/s and 0,9 m/s.

The method has been validated for sampling periods up to 24 h. The detection limits for single PAHs and the standard deviations resulting from duplicate measurements are listed.

ISo 16362:2005 describes a sampling and analysis procedure for PAH that involves collection from air onto a filter followed by analysis using high performance liquid chromatography usually with fluorescence detector (FLD). The use of a diode array detector (DAD) is possible. The combination of both detector types is also possible. Total suspended particulate matter is sampled.

Generally, compounds having a boiling point above 430 °C (vapour pressure less than 10-9 kPa at 25 °C, e.g. chrysene, benz[a]anthracene) can be collected efficiently on the filter at low ambient temperatures (e.g. below 10 °C). In contrast, at higher temperatures (above 30 °C, see also ISO 12884[1]), only PAHs having boiling points above 475 °C (vapour pressure less than 10-10 kPa at 25 °C) are determined quantitatively.

General information

  •  : Published
     : 2005-02
    : International Standard confirmed [90.93]
  •  : 1
     : 27
  • ISO/TC 146/SC 3
    13.040.01 
  • RSS updates

Life cycle

Got a question?

Check out our Help and Support