Abstract
ISO 4202:2016 specifies the dimensions of reduction sleeves with external 7/24 taper (Nos. 30, 40, 45, 50 and 60) for tools with Morse taper shanks (Nos. 1 to 6).
All these sleeves allow driving of tools having Morse taper shanks which have a tenon at the small end of the shank; some sleeves allow driving of tools having Morse taper shanks which have an axially tapped hole in the shank:
- with the use of an incorporated screw for sleeves 30 × 1 ? 40 × 1 ? 40 × 2 ? 45 × 1 ? 45 × 2 ? 45 × 3 ? 50 × 2 ? 50 × 3 ? 50 × 4 ? 60 × 3 ? 60 × 4 ? 60 × 5;
- with the use of a draw bar for sleeves 30 × 1 ? 30 × 2 ? 40 × 1 ? 40 × 2 ? 40 × 3 ? 45 × 1 ? 45 × 2 ? 45 × 3 ? 45 × 4 ? 50 × 2 ? 50 × 3 ? 50 × 4 ? 50 × 5 ? 60 × 3 ? 60 × 4 ? 60 × 5 ? 60 × 6.
Morse tapers conform to ISO 296 while 7/24 tapers are in accordance with ISO 297.
Read sample
General information
-
Status: PublishedPublication date: 2016-11Stage: International Standard confirmed [90.93]
-
Edition: 3Number of pages: 4
-
Technical Committee :ISO/TC 29/SC 9ICS :25.060.20
- RSS updates
Life cycle
-
Previously
WithdrawnISO 4202:1978
-
Now
Got a question?
Check out our FAQs
Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)